Single Slot Usb Cradle - Motorola WT4070 Integrator Manual

Troubleshooting the Four Slot Ethernet Cradle (Continued)
Table 10-3
Problem
During data communication,
no data was transmitted, or
transmitted data was
incomplete.

Single Slot USB Cradle

Troubleshooting the Single Slot USB Cradle
Table 10-4
Symptom
LEDs do not light Cradle is not receiving
when wearable power.
terminal or spare
Wearable terminal is not
battery is
seated firmly in the
inserted.
cradle.
Spare battery is not
seated firmly in the
cradle.
Wearable Wearable terminal was
terminal battery removed from cradle or
is not charging. cradle was unplugged
from AC power too soon.
Battery is faulty.
The wearable terminal is
not fully seated in the
cradle.
Ambient temperature of
the cradle is too warm or
too cold.
Spare battery is Battery not fully seated in
not charging. charging slot.
Battery inserted
incorrectly.
Battery is faulty.
Cause
Wearable terminal removed
from cradle during
communication.
Incorrect cable configuration.
Ethernet connection error. Link
LED is not lit (see
page 2-10).
Possible Cause
Ensure the power cable is connected securely to both the cradle
and to AC power.
Remove and re-insert the wearable terminal into the cradle,
ensuring it is firmly seated.
Remove and re-insert the spare battery into the charging slot,
ensuring it is firmly seated.
Ensure cradle is receiving power. Ensure wearable terminal is
seated correctly. Confirm main battery is charging.
View battery status by selecting
Power
Verify that other batteries charge properly. If so, replace the faulty
battery.
Remove and re-insert the wearable terminal into the cradle,
ensuring it is firmly seated.
Move the cradle to an area where the ambient temperature is
between 0 °C and 40 °C (32 °F and 104 °F).
Remove and re-insert the spare battery into the cradle, ensuring it is
firmly seated.
Ensure the contacts are facing down and toward the back of the
cradle.
Verify that other batteries charge properly. If so, replace the faulty
battery.
Maintenance & Troubleshooting 10 - 11
Replace wearable terminal in cradle and
retransmit.
See the system administrator.
See the system administrator. Probable
Link LED on Ethernet connection error.
Action
icon.
Solution
> >
Start Settings Control Panel
>