Changing The Power Settings; Changing The Display Backlight Settings; Changing The Keypad Backlight Settings - Motorola WT4070 Integrator Manual

•
Set the wearable terminal to turn off after a short period of non-use.
•
Set the display and keypad backlight to turn off after a short period of non-use.
•
Turn on the keypad backlight only if needed.
•
Turn off all wireless radio activity when not in use.

Changing the Power Settings

NOTE To navigate using the keypad refer to the WT4070/90 Wearable Terminal User Guide.
To set the wearable terminal to turn off after a short period of non-use:
Select >
1. Start Settings
Press .
2. ENTER
Select the
3. On battery power: Turn off device if not used for:
box.
Press .
4. ENTER

Changing the Display Backlight Settings

NOTE To navigate using the keypad refer to the WT4070/90 Wearable Terminal User Guide.
Not applicable on the Voice Only WT4090.
Changing the Backlight setting on the Voice Only WT4090 will change the brightness of the Application
Controlled LED. Refer to the EMDK Help file WT4090-VOW Programming page for more information.
To change the display backlight settings in order to conserve more battery power:
Select >
1. Start Settings
Press .
2. ENTER
Select the
3. On battery power: Disable backlight if not used for:
list box.
Select the
4. Brightness
Select the
5. Disable backlight
Use the slider to set the brightness of the backlight. Set it to a low value to save battery power.
6.
Press .
7. ENTER

Changing the Keypad Backlight Settings

NOTE To navigate using the keypad refer to the WT4070/90 Wearable Terminal User Guide.
Not applicable on the Voice Only WT4090.
Changing the Keypad Backlight setting on the Voice Only WT4090 will change the brightness of the
WLAN Status LED. Refer to the EMDK Help file WT4090-VOW Programming page for more information.
To change the keypad backlight settings in order to conserve more battery power:
> > icon >
Control Panel Power
> >
Control Panel Backlight
tab.
check box to completely turn off the display backlight.
tab.
Power Off
check box and select a value from the drop-down list
icon > tab.
Battery Power
check box and select a value from the drop-down
Getting Started 1 - 9