Lan; General Setup - Draytek Vigor2960 Series User Manual

Refresh
Interface
Enable
Duplex
Speed
4 . 2 L A N
4 . 2 L A N
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design
of network structure is related to what type of public IP addresses coming from your ISP.
The most generic function of Vigor router is NAT. It creates a private subnet of your own.
As mentioned previously, the router will talk to other public hosts on the Internet by using
public IP address and talking to local hosts by using its private IP address. What NAT does
is to translate the packets from private IP address to public IP address to forward the right
packets to the right host and vice versa. Besides, Vigor router has a built-in DHCP server
that assigns private IP address to each local host.
4 . 2 . 1 G e n e r a l
4 . 2 . 1 G e n e r a l
This page allows you to set LAN profiles for PCs in LAN. Settings of DHCP, DHCP Relay,
RADVD and DHCPv6 settings are generated automatically by the system when the LAN
profile is created. You can edit these settings by switching into each tab individually.
Cancel – Click it to exit the dialog without saving anything.
Renew current web page.
Display the name of the WAN port on the router.
Display the status of the profile. False means disabled; True
means enabled.
Display the duplex used (full or half) by such profile.
Display the transmission rate (10M, 100M, 1000M or Auto)
of the date for such profile.
S e t u p
S e t u p
90
Vigor2960 Series User's Guide