Draytek Vigor2960 Series User Manual page 141

Destination
Vigor2960 Series User's Guide
Each type will bring different settings for configuration.
When Subnet is selected as Source Type

IP Address - Type an IP address here as the
source IP address for such rule.

Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the source.

Source Port Begin – Specify a number as the
starting value in the source port range (from 1 to
65535) for such rule.

Source Port End - Specify a number as the
ending value in the source port range (from 1 to
65535) for such rule.
When Object is selected as Source Type

IP Object – Use the drop down list to choose the
source IP object(s) for such rule profile.

IP Group –Use the drop down list to choose the
source IP group(s) for such rule profile.

Source Port Begin – Specify a number as the
starting value in the source port range (from 1 to
65535) for such rule.

Source Port End - Specify a number as the
ending value in the source port range (from 1 to
65535) for such rule.
Destination Type - Choose the address type (Subnet or
Object) for such rule.
Each type will bring different settings for configuration.
When Subnet is selected as Destination Type

IP Address - Type an IP address here as the
destination IP address for such rule.

Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the destination.

Destination Port Begin – Specify a number as the
starting value in the destination port range (from 1
to 65535) for such rule.

Destination Port End - Specify a number as the
ending value in the destination port range (from 1
to 65535) for such rule.
When Object is selected as Destination Type
133