Dos Defense - Draytek Vigor2960 Series User Manual

4 . 5 . 2 D o S D e f e n s e
4 . 5 . 2 D o S D e f e n s e
The DoS function helps to detect and mitigates DoS attacks. These include flooding-type
attacks and vulnerability attacks. Flooding-type attacks attempt to use up all your system's
resources while vulnerability attacks try to paralyze the system by offending the
vulnerabilities of the protocol or operation system.
4 . 5 . 2 . 1 S w
4 . 5 . 2 . 1 S w
Available parameters are listed as follows:
Item
Broadcast Storm
Defense
Multicast Storm Defense
Unknown Unicast Storm
Defense
Unknown Multicast
Storm Defense
Storm Filtering Rate
Refresh
Apply
After finished the above settings, click Apply to save the configuration.
4 . 5 . 2 . 2 S y s
4 . 5 . 2 . 2 S y s
In the Firewall group, click the DOS Defense and click the tab of System. You will see the
following page. The DoS Defense Engine inspects each incoming packet against the attack
signature database. Any packet that may paralyze the host in the security zone is blocked.
The DoS Defense Engine also monitors traffic behavior. Any anomalous situation violating
the DoS configuration is reported and the attack is mitigated.
i t c h
i t c h
Description
Click Enable to block the packets attacks coming from
broadcast storm.
Click Enable to block the packets attacks coming from
multicast storm.
Click Enable to block the packets attacks coming from
unknown unicast storm.
Click Enable to block the packets attacks coming from
unknown multicast storm.
Type a number (1~4096, unit of 64Kpbs) as for the filtering
rate.
Renew current web page.
Click it to save the configuration.
t e m
t e m
190
Vigor2960 Series User's Guide