Table of Contents
Advertisement
Chapter 7
Administration
http://www.cisco.com/en/US/products/ps6918/Products_Sub_Category_Home.html
After you upgrade firmware, the IP camera restarts automatically. It retains all configuration
information.
To display the Firmware window, perform the following steps:
Procedure
Step 1
From the IP camera user interface, click the Setup link.
Click Administration to expand the menu.
Step 2
From the Administration menu, click Firmware.
Step 3
The Firmware window appears.
Table 7-4
Table 7-4
Option
Device Information Area
IP Address
MAC Address
Device Name
Firmware Maintenance Area
Firmware Version
Firmware Released
Date
Details button
Firmware Upgrade
Upgrade button
Device Processes Window
The Device Processes window displays the processes that occupy TCP or UDP ports, and lets you stop
any of these processes.
Note
To stop any process, click the Delete button that appears to the right of the process in the window.
OL-32285-01
describes the options in the Firmware window.
Firmware Window Options
Description
Display only. IP address of the IP camera.
Display only. MAC address of the IP camera.
Display only. ID of the IP camera, as configured in the Basic window. For
more information, see the
Version of the firmware that is installed on the IP camera.
Release date of the current firmware.
Click this button to display a pop-up window with additional information
about the firmware on the IP camera.
To upgrade the firmware on the IP camera, begin by entering the path and
folder where new firmware file for the IP camera is stored. The upgrade file
may be stored on another PC. You can click Browse to find this location.
After entering the path and folder for the firmware file, click this button to
load the firmware upgrade on the IP camera.
Do not power down the IP camera during the upgrade procedure.
"Basic Window" section on page
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Device Processes Window
5-1.
7-7
Advertisement
Table of Contents
