Snmp Window; Medianet Window - Cisco Video Surveillance 3000 Series Configuration Manual

SNMP Window

The Medianet window appears. If you change any options in this window, you must click the Save button
to save the changes. If you do not click this button, changes are not retained when you exit the window.
The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 5-5
Table 5-5
Option
Medianet Features Area
Enable Flow Metadata
SNMP Window
The SNMP window provides options for configuring Simple Network Management Protocol (SNMP)
settings for the IP camera. These settings can help you manage complex networks by sending messages
to different devices on the network.
To display the SNMP window, perform the following steps:
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click SNMP.
Step 3
The SNMP window appears. If you change any options in this window, you must click the Save button
to save the changes. If you do not click this button, changes are not retained when you exit the window.
The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 5-6
Table 5-6
Option
SNMP v2c Area
Enable SNMP v2c
Read Community String Enter the SNMP read community string, which identifies the valid read
Trap Community String Enter the SNMP trap community string.
Primary Trap Receiver
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
5-8
describes the options in the Medianet window.
Medianet Window Options
Description
Check this check box if Medianet is supported in your network. Flow
metadata is the data that describes flow in network.
Enabling this feature helps with sending metadata across the network and
network elements in the media path.
Note This feature is enabled by default.
describes the options in the SNMP window.
SNMP Window Options
Description
Check this check box to enable SNMP v2c.
community.
Identify the primary trap receiver of the SNMP v2c manager by choosing IP
Address or Hostname from the drop-down list and entering the IP address
or host name in the corresponding field.
Chapter 5 Network Setup
OL-32285-01