Table of Contents
Advertisement
Chapter 7
Administration
User Window
The User window lets you configure the following types of IP camera users:
•
•
There is always at least one user with Administrator privileges configured. The user name of this user is
"admin." You can configure up to four additional users and assign privilege levels to each one.
When you configure users, follow these guidelines:
•
•
•
•
To display the User window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Step 2
Click Administration to expand the menu.
Step 3
From the Administration menu, click Users.
The User window appears.
Table 7-2
OL-32285-01
Administrator—Can access all IP camera windows, features, and functions.
Viewer—Can access only the Camera Video & Control window and all features in that window
except:
Video image controls
–
Focus and Zoom controls
–
Privacy Zone controls
–
Set Current Preset as Home button
–
Add Preset Position button
–
Deleted Selected Preset button
–
Pan/tilt speed controls
–
–
Motion detection controls
After you enter a name, password, and privilege level for a user, click Add next to the user
information to save your changes.
To change the password for an existing user, click Change next to the user name.
To remove a user, click Delete next to the user. If you delete a user who is logged into the IP camera,
the user remains logged in and can continue access the IP camera.
To change the name of a user, you must delete the user then create a new user.
describes the options in the User window.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
User Window
7-3
Advertisement
Table of Contents
