App License Window - Cisco Video Surveillance 3000 Series Configuration Manual

App License Window

Table 6-1
Option
Video Area
Enable Video
Resolution
Audio Area
Enable Audio
Sampling Frequency
App License Window
The App License window lets you install and uninstall licenses for apps, and provides information about
licenses that are installed on the IP camera.
The appropriate license must be installed on an IP camera before an app is installed on the camera.
Before you can install a license, obtain a valid license from Cisco and save the license file on your local
PC or on a PC that you can access from your local PC.
To display the App License window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Application Manager to expand the menu.
Step 2
From the Application Manager menu, click App License.
Step 3
Table 6-2
Table 6-2
Option
License Installation Area
License File
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
6-2
Configuration Window Options (continued)
Description
Check this check box to enable video for installed apps that support video.
Before you can enable video, Stream 2 and Analog Video must be disabled.
For Stream 1, Maximum Frame Rate should be set to a value of 15 fps or less
and Video Resolution should be set to a value of 1920x1080 or less, as
described in the
Select the video resolution for installed apps that support video.
Check this check box to enable audio for installed apps that support audio.
Before you can enable audio, Stream 2 and audio for Stream 1 must be
disabled.
Display only. Sampling frequency of audio from the IP Camera for installed
apps that support audio (16 kHz).
describes the options in the App License window.
App License Window Options
Description
To install a license file, use the Browse button to navigate to the file, select
the file to enter it in the License File field, and then click Install License
"Streaming Window" section on page
Chapter 6 Application Manager
4-1.
OL-32285-01