X Window - Cisco Video Surveillance 3000 Series Configuration Manual

Chapter 5 Network Setup
Table 5-7
Option
Device (Client)
Certificate
Password (for Private
Key)
Root CA Certificate
EAP-TTLS Configuration Options
Note
Inner Authentication
User Name
Password
Anonymous ID
Validate Server
Certificate
Root CA Certificate
EAP-PEAP Configuration Options
Note
Inner EAP Protocol
User Name
Password
Anonymous ID
Root CA Certificate
EAP-FAST Configuration Options
Note
Inner EAP Protocol
User Name
OL-32285-01
802.1x Window Options (continued)
Description
Path and folder where the device certificate for the IP camera is stored. You
can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to
the IP camera.
If the private key in the device certificate is password protected, enter the
password that is required to unlock the private key.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to
the IP camera.
These options appear if you select the protocol type EAP-TTLS.
Choose an inner authentication method for EAP-TTLS. Options are
MS-CHAP, MS-CHAP v2, PEAP, and EAP-MDS.
Enter the user name that the IP camera uses to access the RADIUS server.
Enter the password that the IP camera uses to access the RADIUS server.
Optional. Unsigned public identifier to be used instead of a user name for
logging in to the RADIUS server.
Check this check box if you want the identity of the RADIUS server to be
validated.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to
the IP camera.
These options appear if you select the protocol type EAP-PEAP.
Choose an inner authentication method for EAP-PEAP.
Enter the user name that the IP camera uses to access the RADIUS server.
Enter the password that the IP camera uses to access the RADIUS server.
Optional. Anonymous identifier to be used instead of a user name for
logging in to the RADIUS server.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to
the IP camera.
These options appear if you select the protocol type EAP-FAST.
Choose an inner authentication method for EAP-FAST.
Enter the user name that the IP camera uses to access the RADIUS server.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide

802.1x Window

5-11