Time Window - Cisco Video Surveillance 3000 Series Configuration Manual

Table of Contents

Advertisement

Chapter 5
Network Setup

Time Window

The Time window provides options for setting and maintaining the time of the IP camera.
To display the Time window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click Time.
Step 3
The Time window appears. If you change any options in this window, you must click the Save button to
save the changes. If you do not click this button, changes are not retained when you exit the window. The
Save button appears at the bottom of the window. You might need to scroll down to it.
Table 5-3
Table 5-3
Option
Set Time Mode Area
Manually Configure
Time
Use NTP Server to
Update Time
Local Time Area
Note
Set Local Date
Set Local Time
Clone PC Time button
Time Zone and Daylight Saving Area
Time Zone
Adjust for Daylight
Saving Time
OL-32285-01
describes the options in the Time window.
Time Window Options
Description
Choose this option if you want to set the time for the IP camera manually.
Choose this option if you want the IP camera to obtain its time from a
network time protocol (NTP) server.
If you check this check box, the camera contacts the designated NTP server
every 64 seconds and synchronizes its internal clock with the time of that
server.
These options do not apply if you choose the Use NTP Server to Update Time option.
Enter a date for the IP camera. The camera is updated with this date when
you click Save.
Enter a time for the IP camera. The camera is updated with this time when
you click Save.
Click this button to update the IP camera date and time with the date and time
of the PC that you are using.
Choose the time zone in which the IP camera is located.
The time that appears when you view video from this IP camera reflects this
time zone.
Check this check box if you want the time of the IP camera to adjust
automatically for daylight saving time.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
Time Window
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000 series

Table of Contents