Password Complexity Window - Cisco Video Surveillance 3000 Series Configuration Manual

Password Complexity Window

Take care when stopping processes because some processes are required for the camera to operate
properly. Processes that you stop in this window can restart the next time that you log in to the IP camera.
If you delete a required process and the camera stops functioning, exit your web browser and then log
back in to the IP camera to restart the process. If the process does not restart, power the IP camera off
and then back on.
To display the Device Processes window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Administration to expand the menu.
Step 2
From the Administration menu, click Device Processes.
Step 3
The Device Processes window appears.
Table 7-5
Table 7-5
Option
Protocol
Local Address
Foreign Address
State
Program Name
Password Complexity Window
IP camera administrator and user passwords must always meet the requirements that are described in the
"User Window" section on page
configuring additional requirements for the IP camera passwords.
To display the Password Complexity window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Administration to expand the menu.
Step 2
From the Administration menu, click Password Complexity.
Step 3
The Password Complexity window appears. If you change any options in this window, you must click
the Save button to save the changes. If you do not click this button, changes are not retained when you
exit the window. The Save button appears at the bottom of the window. You might need to scroll down
to it.
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
7-8
describes the options in the Device Processes window. All options are for display only.
Device Processes Window Options
Description
Port (tcp or udp) that the process occupies.
IP address of the device to which the process is listening.
IP address and port number of the client device that is connected for the
process.
State of the process.
Name of the process.
7-3. The Password Complexity window provides options for
Chapter 7 Administration
OL-32285-01