Cisco Video Surveillance 3000 Series Configuration Manual page 64

Table of Contents

Advertisement

802.1x Window
Table 5-6
Option
Privacy Method
Privacy Password
802.1x Window
The 802.1x window provides options for configuring 802.1x authentication for the IP camera. These
settings require that RADIUS be configured on your network to provide the client authentication.
To display the 802.1x window, perform the following steps:
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click 802.1x.
Step 3
The 802.1x window appears. If you change any options in this window, you must click the Save button
to save the changes. If you do not click this button, changes are not retained when you exit the window.
The Save button appears at the bottom of the window. You might need to scroll down to it.
Table 5-7
Table 5-7
Option
802.1x Settings Area
Enable 802.1x
Protocol Type
EAP-TLS Configuration Options
Note
User Name
Cisco Video Surveillance 3000 Series IP Camera Configuration Guide
5-10
SNMP Window Options (continued)
Description
Choose DES if you want to use this privacy method for SNMP v3 messages
that are sent on behalf of the corresponding user.
If you do not want to use a privacy method, choose None.
If you choose a privacy method, enter a password for SNMP v3 messages
that are sent on behalf of the corresponding user.
This password can contain from 8 to 63 characters, which can be letters,
numbers, and special characters, but no spaces. Special characters are: ! $ (
) - . @ ^ _ ` { } ~
describes the options in the 802.1x window.
802.1x Window Options
Description
Check this check box to enable 802.1x authentication for the IP camera.
Choose the protocol for 802.1x authentication. Options are
EAP-TLS
EAP-TTLS
EAP-PEAP
EAP-FAST
The remaining fields in this window change depending on the protocol type
that you choose.
These options appear if you select the protocol type EAP-TLS.
Enter the user name that the IP camera uses to access the RADIUS server.
Chapter 5
Network Setup
OL-32285-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000 series

Table of Contents