Thermal Cutoff (Tco) (Gas Dryers Only) - KitchenAid Pro Line KHEV01RSS Technical Education

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
THERMAL CUTOFF (TCO)
(GAS DRYERS ONLY)
Refer to page 4-10 for the procedure for ac-
cessing the thermal cutoff (TCO).
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Disconnect the wire connectors from the
TCO terminals.
4. Set the ohmmeter to the R X 1 scale.
5. Touch the ohmmeter test leads to the TCO
terminals. The meter should indicate a
closed circuit (0 Ω).
WARNING
Electrical Shock Hazard
Terminals
5-10
Thermal Cutoff (TCO)