KitchenAid Pro Line KHEV01RSS Technical Education page 51

e) To remove the coils from the burner
assembly, remove the two screws from
the bracket, and lift the two coils off the
cores.
5. Remove the two T-20 screws from the
burner funnel, and pull the funnel forward
so you can access the components.
Burner Funnel Screws
Bracket Screws
Coils
6. To remove the flame sensor:
a) Remove the blue and white wires from
the sensor terminals.
b) Remove the hex-head screw from the
flame sensor and remove the sensor
from the burner funnel.
7. To remove the thermal cutoff (TCO):
a) Disconnect the two connectors with the
black wires from the TCO terminals.
b) Remove the hex-head screw from the
TCO bracket and remove the cutoff.
8. To remove the high limit thermostat:
a) Disconnect the two connectors with the
white wires from the high limit thermo-
stat.
b) Remove the two hex-head screws from
the high limit thermostat and remove the
thermostat.
Flame Sensor
Screw
Blue & White
4-11
TCO
Thermostat
2 Black
Screw
Screw
(1 of 2)
High Limit
2 White