16. Position the wire harness on top of the
blower motor assembly and remove the
assembly from the dryer.
Wiring Harness
Remove Blower Motor Assembly
17. Remove the nine T-20 screws from the
blower cover and remove the cover.
Blower Cover
Screw (1 of 9)
18. Remove the four locknuts and washers
from the blower motor and remove the
motor from the housing.
Blower Motor
Nuts & Washers
19. Remove the four locknuts and washers
from the blower motor bracket.
20. Remove the five blower motor screws and
washers from the bracket and remove the
bracket and motor from the housing.
5 Blower Motor
Screws & Washers
4-18
Bracket Nuts
& Washers
Blower Motor & Fan