Chapter 3
Connecting the Router
Connecting a GE Line to an GE WAN Port
To connect the Gigabit Ethernet (GE) WAN port on the router, follow these steps:
Connect one end of the yellow cable to the GE WAN port as shown in
Step 1
Figure 3-27
1
2
Step 2
Connect the other end of cable to an available port on the modem.
Connecting an xDSL Line
Warning
Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF
or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,
detach the end away from the unit first. Statement 1026
Connecting the GE WAN Port
1
2
Internet
Internet
Internet
GE WAN port
CAT 5 cable
3
3
Modem connected to the Internet
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
Figure
3-27.
3-31