Cisco 800 Series Hardware Installation Manual page 62

Cisco 860, 880, 890 Series
For the Cisco C867VAE-POE-W-A-K9, Power-over-Ethernet (PoE) is available using port FE0, with a
Note
60-W power supply.
USB Interface
The USB 2.0 interface enables:
•
•
Use only the following Cisco USB 2.0 flash tokens:
•
•
•
Note The USB 2.0 port cannot be used for connecting external devices or as a console for devices other than
those specified in the USB eToken Device and USB Flash Features Support Data Sheet, available at:
http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.h
tml
LED Indicators
These router models include LED indicators on the back panel for each LAN port, and additional LED
indicators on the front panel of the unit.
LED Indicators for LAN Ports
On the back panel of the unit, each LAN port includes an LED indicator.
indicators.
Table 1-24
Port
FE Ports
FE LAN 0
FE LAN 1
FE LAN 2
GE Ports
GE LAN 0
GE LAN 1
Cisco Integrated Services Router Hardware Installation Guide
1-42
Transferring data using a USB flash token (USB memory stick) for system recovery and other tasks.
Cisco IOS software boot from USB.
MEMUSB-128FT (128 MB)
MEMUSB-256FT (256 MB)
MEMUSB-1024FT (1 GB)
Back Panel LED Indicators for LAN Ports
LED Color
Green
Green
Green
Green
Green
Description
Off—No link.
Faster flashing indicates heavier traffic.
Off—No link.
Faster flashing indicates heavier traffic.
Off—No link.
Faster flashing indicates heavier traffic.
Off—No link.
Faster flashing indicates heavier traffic.
Off—No link.
Faster flashing indicates heavier traffic.
Chapter 1 Product Overview
Table 1-24 describes the LED