Cisco 800 Series Hardware Installation Manual page 220

Cisco 860, 880, 890 Series
Connecting a PC, Server, or Workstation
To connect a PC (or other Ethernet devices) to an Ethernet switch port, follow these steps:
Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router.
Step 1
Figure 3-1
Figure 3-7
1
2
Connect the other end of the cable to the RJ-45 port on the network interface card (NIC) that is installed
Step 2
in the PC, server, or workstation.
(Optional) Connect additional servers, PCs, or workstations to the other Ethernet switch ports.
Step 3
Note Use the Cisco Configuration Express to configure the Internet connection settings. See
Cisco Configuration Professional Quick Start Guide
Cisco Integrated Services Router Hardware Installation Guide
3-12
shows a Cisco 888W router connected to a PC.
Connecting a Server, PC, or Workstation
1
Yellow Ethernet cable supplied with the router 3
Ethernet switch port on the router
2
3
RJ-45 port on the network interface card
for more information.
Chapter 3 Connecting the Router