Connecting An Fe Line-Fe4 Wan Port - Cisco 860 Series Hardware Installation Manual

Chapter 3 Connecting the Router
Step 4 Connect the second unshielded Category 5 cable from the telecommunication service port on the splitter
to the wall jack to allow a link to the network service provider.
Connecting an FE Line—FE4 WAN Port
To connect the Fast Ethernet (FE) 4 WAN port on the router, follow these steps:
Step 1 Connect one end of the yellow cable to the Ethernet FE4 WAN port.
connection.
Figure 3-6
1
2
Connect the other end of cable to an available port on the modem.
Step 2
OL-16193-01
Connecting the FE4 WAN Port
WAN
FE 4
1
2
3
Internet Internet Internet
FE4 WAN port
WAN connection to the Internet
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
Connecting an FE Line—FE4 WAN Port
Figure 3-6
1
3
Modem, which connects to the Internet
shows an FE4 WAN port
3-9