Cisco 800 Series Hardware Installation Manual page 67

Chapter 1 Product Overview
Figure 1-20
Figure 1-20
1
Primary WAN port—VDSL/ADSL over
POTS
2
4-port 10/100 Ethernet switch
3
Serial port—console or auxiliary
4 PoE power connector—optional
1. 887VA-M has Annex M support.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
For the Cisco 887VA, the primary WAN port is designed for an RJ-11 connector only. Damage to the
Figure 1-21
antennas on the back panel. However, the feature locations are similar across all Cisco 880 series data
routers.
Figure 1-21
shows the back panel details of the Cisco 887VA and 886VA-M data router.
Back Panel of the Cisco 887VA and 887VA-M Router
1
1
2
primary WAN port may occur if a non-RJ-11 connector is inserted.
shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have
Back Panel of the Cisco 888W Data Router
1 2
2
5
Reset button
6
Power connector
7
Earth ground connection
8 Kensington security slot
3 4
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
3 4 5 6 7 8
5 6 7 8 9 10
1-47