Cisco 800 Series Hardware Installation Manual page 141

Chapter 1 Product Overview
Table 1-42 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued)
LED Color
BRI Voice B2 Green
FXS/DID Voice Green
V.92 Modem Green
14
SFP EN Off
Green
Amber
SFP S Green
1. SSID = service set identifier.
2. LWAPP = Lightweight Access Point Protocol.
3. PPP = Point-to-Point Protocol.
4. xDSL = General term referring to various forms of DSL, including ADSL (asymmetric digital subscriber line) and VDSL (very-high-data-rate digital
subscriber line).
5. DSLAM = digital subscriber line access multiplexer.
6. ATM = Asynchronous Transfer Mode.
7. EFM = Ethernet in the First Mile.
8. 3G = Third-Generation.
9. WWAN = wireless WAN.
10. RSSI = Received Signal Strength Indicator.
11. GSM = Global System for Mobile Communication.
12. CDMA = code division multiple access.
13. SRST = Survivable Remote Site Telephony.
14. SFP = small-form-factor pluggable.
Table 1-43
867VAE-K9 ISRs.
Description
On—BRI B2 channel is connected.
Blinking—BRI B2 channel is either receiving or
transmitting data.
On—FXS/DID port is connected.
Blinking—FXS/DID port is either receiving or
transmitting data.
On—Modem is connected.
Blinking—V.92 port is either receiving or transmitting
data.
Not present.
Present and enabled.
Present with failure.
Blinking—Blinking frequency indicates port speed.
describes the LEDs for the Cisco 866VAE, Cisco 867VAE, Cisco 866VAE-K9, and Cisco
860 Series 880 Series
—
—
—
—
—
—
—
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
890 Series
— —
SRST —
models
— 891
models
— 892F
models
—
—
— 892F
models
1-121