Cisco 800 Series Hardware Installation Manual page 98

Cisco 860, 880, 890 Series
Table 1-33
Table 1-33
Number
1
2
3
4
5
6
7
Cisco Integrated Services Router Hardware Installation Guide
1-78
describes the LEDs for Cisco C887VAG-4G ISR.
LED Descriptions for the Cisco C887VAG-4G ISR
LED Color
Power OK Green
PPP Green
PoE Green
Amber
xDSL CD Green
xDSL Data Green
SIM Green / Yellow
(one green blink
followed by two
yellow blinks)
Yellow / Green
(one yellow
blink followed
by two green
blinks)
Off / Green (two
green blinks and
then a pause)
Green / Off
(slow blink once
and then a
pause)
Off / Off
VPN Green
FE LAN Green
Port Links
Status
Description
On—DC power is being supplied to the router and the
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in
ROMMON mode.
Off—Power is not supplied to the router.
On—At least one PPP session is established.
On—PoE is connected and powered.
Off—PoE is not installed.
On—Fault with the PoE.
On—The xDSL interface is connected to the DSLAM.
Blinking—Training the line.
Off—Indicates that a connection has not been established
or the port is shut down.
Blinking—The xDSL interface is either receiving or
transmitting data.
Off—No data is being transmitted or received.
SIM in slot 0 is active, SIM in slot 1 is not.
SIM in slot 1 is active, SIM in slot 0 is not.
No SIM in slot 0, SIM present in slot 1.
SIM present in slot0, no SIM in slot 1.
No SIM present in either slots.
On—VPN is connected.
On—Ethernet port is connected.
Blinking—Data is either being received or transmitted.
Off—Ethernet port is not connected.
Chapter 1 Product Overview