Cisco 800 Series Hardware Installation Manual page 71

800 series integrated services router
Hide thumbs Also See for 800 Series:
Table of Contents

Advertisement

Chapter 1
Product Overview
Figure 1-24
Figure 1-24
1
2
3
4
5
1. Depending on the router model, the primary WAN port can be either G.SHDL or 10/100 FE.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
3. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
The primary WAN port on all 888E models is designed for an RJ-45 connector only. Damage to the
Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W
Figure
Cisco 887VA-V routers. The features available vary, depending on the router model. Some features may
not be available on your router.
The Cisco 881-V and Cisco 887VA-V voice and data series gives you the flexibility to use either FXS
or BRI voice ports. However, the number of concurrent calls that can be supported by the router is limited
by the codec complexity setting on the router.
supported when the codec complexity command is configured for Flexible, Medium or High complexity.
shows the back panel details of the Cisco 888SRST-W voice router.
Back Panel of the Cisco C888SRST-W Voice Router
2
1
Primary WAN port
—G.SHDSL
Voice ports—four FXS/DIDports and one
voice BRI port
4-port 10/100 Ethernet switch
Serial port—console or auxiliary
PoE power connector for optional PoE
3
module
to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field
Replaceable Unit (FRU) to enable the PoE function. For this you either need the FRU "800-IL-PM=2" or "800G2-POE-2".
If your device has a separate PoE inlet, use the 800-IL-PM=2, if it has one combined inlet (a description saying "POE
OPTION REQUIRES 5A POWER ADAPTOR"), then use the 800G2-POE-2.
primary WAN port may occur if a non-RJ-45 connector is inserted.
1-25,
Figure
1-26, and
1
2
6
6
7
2
8
9
10 Kensington security slot
Figure 1-27
show the features available on the Cisco 881-V and
Table 1-26
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
3
4
5
7
Antenna—captive wireless omnidirectional
dipole WLAN antenna (wireless models only)
Reset button
Power connector
Earth ground connection
lists the maximum number of calls that is
8
9
10
1-51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents