Cisco C898Eag-Lte Integrated Service Router - Cisco 800 Series Hardware Installation Manual

Cisco 860, 880, 890 Series
6
7
8

Cisco C898EAG-LTE Integrated Service Router

Figure 1-52
Figure 1-52
Table 1-36
Table 1-36
Number LED
1
2
3
Cisco Integrated Services Router Hardware Installation Guide
1-88
8-port Gigabit Ethernet switch
Console/Auxiliary port
Power connector
shows the front panel of the Cisco C898EAG-LTE ISR.
Front Panel of the Cisco C898EAG-LTE ISR
2 4
1 3
6 8
7 9
describes the LEDs for the Cisco C898EAG-LTE ISR.
LED Descriptions for the Cisco C898EAG-LTE ISR
Color
Power OK Green
PoE Green
Amber
GE LAN PoE Green/Ambe
Ports r
14 Active GPS antenna connector
15 VDSL or ADSL over POTS
16 4G antenna connector—M0/MAIN
5
10 12
11 13
Description
On—DC power is being supplied to the router and the
Cisco IOS software is running.
Blinking—Boot up is in process, or the router is in
ROMMON mode.
Off—Power is not supplied to the router.
On—PoE is connected and powered.
Off—PoE is not installed.
On—Fault with the PoE.
Amber On—Ethernet port is connected.
Amber On—Fault with PoE. There is a fault with the
in-line power supply.
Green/Amber Blinking—Data is either being received or
transmitted.
Green/Amber Off—Ethernet port is not connected.
Chapter 1 Product Overview