Cisco 800 Series Hardware Installation Manual page 66

Cisco 860, 880, 890 Series
Figure 1-18
1
LEDs
2
3G express card slot—Supports third-party
3G card (Cisco 880G models only)
1. See the
Figure 1-19
Figure 1-19
1
Data BRI
2
Primary WAN port—VDSL/ADSL over
ISDN
3
4-port 10/100 Ethernet switch
4 Serial port—console or auxiliary
5
PoE power connector—optional
1. BRI = Basic rate interface.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN port may
Cisco Integrated Services Router Hardware Installation Guide
1-46
Front Panel of the Cisco 880 Series Wireless Data Router
Cisco 880 Series Integrated Services Routers
shows the back panel details of the Cisco 886VA data router.
Back Panel of the Cisco 886VA Router
1 2
1
0
2
occur if a non-RJ-45 connector is inserted.
1
3
USB port
1
data sheet for supported vendors.
3
6
Reset button
7
Power connector
8
Earth ground connection
9 Kensington security slot
Chapter 1 Product Overview
2 3
4 5 6 7 8 9