Installing On A Table; Mounting On A Wall - Cisco 800 Series Hardware Installation Manual

Chapter 2 Installing the Router
Figure 2-20
1
2

Installing on a Table

To install the router on a table or other flat horizontal surface, firmly place the router on a table or other
horizontal surface. Keep at least 1 inch (2.5 centimeters) of clear space for heat dissipation.
Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the
"Installing the Router Using the Configurable Low Profile DIN Mount" section on page

Mounting on a Wall

The Cisco 819 ISR has mounting holes on the bottom of the chassis for mounting the unit on a wall or
other vertical surface. The attachment hardware is provided.
Tip When choosing a location for wall-mounting the router, consider cable limitations and wall structure.
Cisco WiFi Antenna Assembly
2
3G Dipole External Antenna
WiFi 2.4/5 Ghz Dipole External Antenna
3
3
RP-TNC Connector
Cisco Integrated Services Router Hardware Installation Guide
Installing the Cisco 810 ISR
1
2-30.
2-25