Cisco 800 Series Hardware Installation Manual page 143

Chapter 1 Product Overview
Table 1-44
Table 1-44LED desciption for Cisco 892FSP ISR, 896VA, 897VA, and 898EA Routers
LED
PWR_OK
GE0
GE1
GE2
GE3
GE4
GE5
GE6
GE7
GE WAN ports Green
SFP WAN
ports
VPN_OK
PPP_OK
Shared LEDs on the Cisco 881-V and Cisco 887VA-V Voice and Data Routers
On the Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W routers, the BRI1, BRI2 and the FXS ports
share LED indicators. The following ports share an LED indicator:
•
•
•
•
describes the LEDs for the Cisco 892FSP.
Color
Green
Green/Amber
Green
Green
Green
Green
BRI 1B1 channel and FXS 3
BRI 1B2 channel and FSX 4
BRI 2B1 channel and FXS 5
BRI 2 B2 channel and FXS 6
Activity Description
Power Status Off—No power.
Steady on—Normal operation.
Blink—Boot up phase or in ROM Monitor mode.
Link Status Green On—Ethernet port is connected.
Amber On—Fault with PoE. There is a fault with
the inline power supply.
Green/Amber Blinking—Data is either being
received or being transmitted.
Green/Amber Off—Ethernet port is not
connected.
Link Status On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
Link Status On—Port is connected.
Blinking—Data is either being received or being
transmitted.
Off—No link.
Link Status On—Port is connected.
Blinking—Data is either being received or being
transmitted.
Off—No link.
— Off—No tunnel.
Steady on—At least one tunnel is up.
— Off—No PPP session.
Steady on—At least one PPP established.
Cisco Integrated Services Router Hardware Installation Guide
Cisco 860, 880, 890 Series
1-123