Installing On A Table; Mounting On A Wall - Cisco 860 Series Hardware Installation Manual

Installing the Router
Figure 2-3

Installing on a Table

To install the router on a table or other flat horizontal surface, firmly place the router on a table or other
horizontal surface. Keep at least 1 inch (2.5 centimeters) of clear space beside the cooling inlet and
exhaust vents.
Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the
"Installing the Router Ground Connection" section on page

Mounting on a Wall

The Cisco 860 series, 880 series, and 890 series ISRs have mounting holes on the bottom of the chassis
for mounting the unit on a wall or other vertical surface.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
2-6
Antennas Oriented Vertically Down
Chapter 2 Installing the Router
2-10.
OL-16193-04