Yamaha HTR-5750 Owner's Manual page 84

Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
Connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier.
• lo
connect with a YAMAHA DSP amplifier (or AV
• When connecting the subwoofer to the SPLIT
receiver), connect the SUBWOOFER (or LOW PASS etc.)
SUBWOOFER terminals on the rear of the DSP amplifier,
terminal on the rear of the
DSP amplifier (or AV receiver)
be sure to connect the L /MONO INPUT terminal to the
to the L /MONO INPUT terminal of the subwoofer.
12' side and the p INPUT terminal to the "R" side of the
SPLIT SUBWOOFER terminals,
Right main speaker
MnI )
01(0))
Subwoofer
I I I 11
r..2:
®,m,„ (-4 ) \---- --
AITIP ------- -------- '
-
o .)) 8
Ofl
m I
To AC outlet
Left main speaker
Subwoofer cable
n
(not included)
(12.-n
. 7741.7)
1 . 0
0
0
Audio pin cable
(not included)
Amplifier
SPLIT SUBWOOFER
0
----------
-Hrit
r
e ) ) .
SUBWOOFER
(LOW PASS)
Notes
• Some amplifiers have line output terminals labeled PRE
OUT. When you connect the subwooter to the PRE OUT
terminals of the amplifier, make sure that the amplifier
has at least two sets of PPE OUT terminals. If the
amplifier has only one set of PRE OUT terminals, do not
connect the subwoofer to the PRE OUT terminals.
• When connecting to a monaural line output terminal of
the amplifier, connect the LIMON() INPUT terminal.
E-4