Yamaha HTR-5750 Owner's Manual page 17

Before connecting components
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
•
Cable indications
For analog signals
left analog cables DI
L Lk
right analog cables
-V7Is
For digital signals
optical cables
coaxial cables
For video signals
video cables
S-Video cables
1, 1 11t h sr
• Analog jacks
You can input analog signals from audio
components by
connecting audio pin cable to the analog jacks on this unit.
Connect red plugs to the right jacks and white plugs to the
left jacks.
•
Digital jacks
This
unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCIVI. Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the
input signals from
the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
Note
This
unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (RFC) jacks.
I II
R-5750 only J likewise audio signals input to the digital
[OPTICAL or COAXIAL) jacks are only output to the DIGITAL
OUTPUT jack.
Dust protection cap
Pull out the cap
from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place. This cap protects the jack from dust.
• Video jacks
HTR-5750 ]
This unit has three types of video jacks_ Connection
depends on the availability of input jacks on your monitor.
The signals input through the S VIDEO jacks on this unit
are automatically converted for output through the VIDEO
jacks. When V CONV, is set to ON (see page 49), signals
input through the VIDEO jacks can be output through the
S VIDEO jacks.
VIDEO
0
'166
[ HTR-5740
This unit has two types of video jacks. Connection
depends on the availability of input jacks on your monitor.
COMPONENT VIDEO
VIDE
,
Po
Pa Y
0 0 0
VIDEO jack
For conventional composite video signals.
S
VIDEO jack ( HTR
-
5750 only )
For S-Video signals. separated into luminance (Y) and
color (C) video signals
to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals. separated into luminance (Y) and
color difference (PIO. PR ) to provide the best quality in
picture reproduction.
Note
[ HTR-5730 only I When signals are input through both the S
VIDEO and VIDEO
jacks. signals input through the S VIDEO
jack
have priority
13