Yamaha HTR-5750 Owner's Manual page 51

•
Speaker level Fi)SP LEUEL
Use these settings to manually balance the speaker levels
between the front left or sun -ound left speakers and each
.speaker selected in SPEAKER SET (page 46).
Choices: —10.0 dB to +10.0 dB
• FR adjusts the balance of the front left and front right
speakers.
• C adjusts the balance of the front left and center
speakers.
• SL
adjusts the balance of the front left and summnd
left speakers.
• SB
adjusts
the balance of the surround left and
surround hack speakers.
• SR adjusts the balance of the surround left and
surround right speakers.
• SWFR
adjusts
the balance of the front left speaker and
subwooler.
IL ,
•
dlihrate. use Lhe
ILH
1011e Fein tEIC i ',el:
pw:c
• Speaker distance OSP DISTPHOE
Use
this feature to manually Input the distance of each
speaker and adjust the delay applied to respective channel.
Ideally, each speaker should he the same distance from the
main listening position. However, this is not possible in
most home situations. Thus, a certain amount of delay
must be applied to the
sound
titan each speaker so that all
sound will arrive at the listening position at the same time.
Unit MIT
Choices: meters (ml, feet It
Initial setting:
U.S.A. and Canada models: leer (MI
Other models: meters
ml
• Select meters to input speaker distance, , , in meters.
• Select feet to input speaker distances in feet.
Speaker distances
Choices: 0.3 to 24.00
Ill I
to 80 ft)
• FRONT
L
adjusts the distance of the front left speaker.
Initial setting: 3.0 m (10.0 114
• FRONT R adjusts the distance of the front right
speaker. Initial setting: 3.0 m (10.0 f))
• CENTER adjusts the distance of the center speaker.
Initial setting: 3.0 nil 10.0 ft)
• SURR
L
adjusts the distance of the surround left
speaker. [natal setting: 3.0 m 110.0 it)
• SURR R adjusts the distance of the surround right
speaker. Initial setting: 3.0 nil 10.0 ft)
• SURR
B
adjusts the distance of the surround back
speaker. Initial setting: 2.10 m (7.0 ft
• SWFR adjusts the distance of the subw Doter. Initial
3.0 m (10.0 fti
• Center graphic equalizer D)CENTER GEO
Use this feature to adjust the built-in 3-band graphic
equalizer tor the center channel so that the tonal qualit). of
the center Teaker matches that of the front speakers. You
can make adjustments listening to the currently selected
source component or a test tone.
You can adjust 3 frequency bands:
100Hz. 300Hz. lkHz. 3kHz. 10kHz
Choices: —6 to +6 dB
• Select ON to output test tones from the front left and
center speakers, tt .td adjust the tonal quality of the
center speaker.
• Select OFF to ;top the test tone and output the
currently selected source component.
•
Low-frequency effect level
E)L.FE LEI.JEL
(I s e
to adjust the output level of the LEE (low-frequency
effect( channel according to the capacity ofyour
sulmoolor or headphones. The LEE channel carries low-
frequffley special effects which are only added to certain
1111 '; setting is effective only when this unit
decodes
DonTh Dtuital Or
DT'S signals.
Choices: -20 to 0 dB
Speaker EP LibiE
Select to adjust the speaker LEE
Headphone HP LEE
Select to adjust the headphone LEE
Note
Dcrolitli or: on rlic I I
I Id
\I
,eitak, some otinals nu.: not
he [flout Low tIc sa I; \4 DNA 12 NH FPU1 tick.
• Dynamic range F F'ANGE
Sc to select the amount of dynamic range compression to
he applied to 'our speakers or headphones. This setting is
effective mly when the unit is decoding Dolby Digital mid
DTS signals.
choit. et,:
MAX I maximum),
STD I standard), MIN
(minimum)
Speaker SP Ct, P
Select to udjust the speaker conipression.
Headphone
HP EL Ft:
Selcet to adju,t the headphone compression.
• Select Ni AX for feature films.
• Select SID lor general
LISC.
• Seied
MIN for listening to sources at low volume
let els.
win
47