Yamaha HTR-5750 Owner's Manual page 48

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit
operates. Change the initial settings
(indicated
in bold under each parameter) to reflect the needs of your listening
emironment.
• BASIC SETUP
Use to quickly setup basic system parameters (see page 22).
• MANUAL SETUP
Use to adjust speaker and system settings.
1 SOUND MENU
Use to manually adjust any speaker setting,
alter the quality and tone of the sound output by the system or compensate for
ideo signal processing delays when using LCD monitors or projectors.
alit
Most of the parameters described in SOUND MENU are set automatically abets you perform
"BASIC SETUP" (see
page 22). You can
use SOUND MENI to make further adjustments.
Item Features
P R14:ER RE.
Selects the size of each speaker. the speakers for low-frequency signal output, and the cross over
frequency.
E SF'
LEUEL
Adjusts the output level
or
each speaker,
SE
DI STPHITE Adjust,
the delay time of each speaker.
D ENT ER raiE &music
the tonal quality of the center - speaker.
DL.FE L.D.JEL.
Adjusts the output level of the LFE channel for Dolby Dipital or DTS signals
RpHGc
Adjusts the dynamic range for Dolby Digital or
DTS
signals.
Li; PLID IC! SET
Customizes the muting level and audio delay.
Page
46
47
47
47
47
47
48
2 INPUT MENU
to reassign digital input/outputs and select the input mode.
Item Features Page
1
1 : . i.3
Plicitrail.
Nssig»s jacks according to the component to be
used.
I HE UT MODE
Selects the initial input mode of the source. 49
3
OPTION MENU
Usc
to adjust the optional s)stein parameters.
Item
>DIR.:RI AY RET
)NEMCFN GUARD
IHI
COZONE SET
Features
Adjusts the brightness of the display and converts video signals.
Locks sound field program parameters and other SET MENU settings.
In the parameters of a croup of sound field programs.
Specifies the location of the speakers connected to the S
terminals.
Page
49
49
SO
50
44