Yamaha HTR-5750 Owner's Manual page 56

Setting manufacturer codes
You can control other components bs. setting the
appropriate manufacturer codes. Codes can be set up for
each input area. For a complete list of available
manufacturer codes. refer to 6-LIST OF
MANUFACTURER CODES" at the end of this manual.
The following table shows the factory preset component
(Library: component category) and the manufacturer
code
for each area.
Component
Input
category Manufacturer
Code
area
' (Library)
CU
CD YAMAHA
0005
MD/CD-R MD YAMAHA
0024
TUNER
TUNER
YAMAHA
0003
DVD DVD YAMAHA 0098
DTV/C13L
-
VAL.\
—
VCR
7'7
Note
You may not be able to operate your YAMAHA component even
if a YAMAHA manufacturer code is initially, set as listed abo'e.
In this ease, try to set other YAMAHA manufacturer code(s).
The
TR AN SM IT indicator on the remote control
flashes twice.
Notes
• If the ma
'itt
fa et urer of your component has more than one code,
fry each of the until you find the correct one.
• If you gait for
1110FC
than 30 seconds during step 3. the setup
phicess is canceled. this happens, start over from step 2.
1
Press
an input selector button or z* to
select the component you want to set up.
0 "5 "a
00
a
1 1
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TPANSMIT
3
Press the numeric buttons to enter the four
digit manufacturer's code for the component
to be used.
Refer to "LIST OF MANUFACTURER CODES - at
the end of this manual.
sff
MUSIC
'0" "0" """
t5
"§:"
52