Yamaha HTR-5750 Owner's Manual page 36

Notes
• When you play DTS-encoded CDfliDs with the input mode set
to AUTO:
—This unit automatically switches to the MS decoding mode.
The unit remains in DES mode (and the
as
indicator may
flash) for up to 30 seconds after playback of the DTS source is
complete. To manually release the DTS mode, press INPUT
MODE to reselect AUTO.
— The DTS decoding mode may be released if search or skip
operations are performed for more than 30 seconds. To
prevent this, press INPUT MODE to select DTS,
• If
the digital output data of the player has been processed in any
way, you may not be able to perform DI'S decoding even if you
make a digital connection between this unit and the plm
Displaying the information about the input
source
You can display the type. format and sampling frequency
of the current input signal.
Select the input source.
o mn. o
ey,°rocsL
cp -
0
in
2
Press AMP to select the AMP mode, then
press STRAIGHT (EFFECT) so that
"STRAIGHT" appears in the display.
STRAIGHT
1-1Thr o 1
R.
then
EFFEC
CTR:ci GHT
3
Press /. / \/
to display the following
information about the input signal.
I
sELEGIl
111111
1
(Format)
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
in Number of source channels in the input
signal. For example. a multi-channel
soundtrack with 3 front channels, 2
surround channels and LFE, is
displayed as "3/2/LFE".
Sampling frequency. When the unit is
unable to detect the sampling
frequency "Unknown" appears.
rate Bit rate. When the unit is unable to
detect the bit rate "Unknown" appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.
32