Yamaha HTR-5750 Owner's Manual page 50

1 SOUND MENU
Use to manuall
adjust any speaker setting or compensate
for 'idea signal processing delays when using LCD
monitors or projectors. Most of the SOUND MENU
parameters are set autoinatically when you perform
"BASIC SETUP - (see page 22).
•
Speaker set P)SPEAKER SET
Use
to manually adjust any speaker setting.
If )ou ale not satudicil gill' the bass sounds from your speakers.
you can change these siltings according to your preference,
Center speaker CENTER
Choices: LRG.
SML,
NONE
• Select LEG it you have a large center speaker The unit
directs the entire range of the center channel signal to
the center speaker.
• Select SML if you have a small center speaker The
unit directs the low-frequency signals of the center
channel to the speakers selected w ith - BASS OUT".
• Select NONE if you do not have a center speaker The
unit directs all of the center channel signal to the front
left and right speakers.
Front speakers FROHT
Choices:
LARGE.
SMALL
• Select LARGE if
you have large front speakers. The
unit directs the entire range of the front lefi and right
channel signals to the front left and right speakers.
•
Select SMAI.I. if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with "BASS OUT".
Surround left/right speakers SURF:
LE!
Choices: LEG.
SML,
NONE
• Select LRG
if you have large surround left and right
speakers. The entire range of the surround channel
signal is directed to the surround left and right
speakers.
• Select SML if you have small surround left and right
speakers.
The low
-
frequency
signals of the surround
channel are directed to the speakers selected with
"BASS OUT'.
• Select NONE if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
rm,de (see page 31) and automatically set the surround
back speaker setting (SUER Fi) to NONE.
Surround back speaker SURE F.
Choices: LEG.
SML.
NONE
Select LEG if you have a large surround back speaker.
Select SMI. if ):Ott have a small surround back speaker
The I( Os -trequeitcy signals of the surround back
channel are directed to the speakers selected with
"BASS
our.
and the rest of the frequency signals are
directed to the surround back speaker
Select NONE if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
Bass out EEG , OUT
Low..
-
frequeney
lbass) signals can be directed to the
subw outer and/or the front left and right speakers
acesnding it) the characteristics of your system. This
setting also determines the routing of the LFE (low-
frequenev effect) signals found in Dolby Digital or DTS
sources.
Choices. SWER (subwoofer). FRONT.
BOTH
• Select SW ER it on connect a subwooler I EF. and
low-frequency signals from other channels are directed
to the subwooler according to the speaker settings.
• Select FRONT if ..ou do not use a subwoofcr. LEE and
loNN -freq11011ey signals from other channels are directed
to the front speakers according to the speaker settings
(es en if on Jane previously set the front speakers to
SMALL).
• Select
Milli
if you connect a subwoofer and you want
Its output loss-frequency signals from front channels to
both the front speakers and sub woofer. LEE and low-
frequenc) signals from other channels are also directed
to the subw (Wier according to the speaker settings. Use
this function to reinforce low-frequency signals using
the
subwoohcr whon
playing
back sources
such as CDs.
Cross over
lice this feature to select a cross-over I cut-oft) CreqUency
for all low-frequency signals. All frequencies below the
selected freqUellCy
\VI
II be sent
to the subwoofer.
Choices: 40Hz. 60Ht.
80Hz.
90Hz, 100Hz. I 10Hz,
120Hz. 160Hz.
20014z
Subwoofer phase SUER P1-1P 7 E
If bass sounds are lacking or unclear. use this feature to
switch the phase of your subwoofer.
Choices: NRM (Tiormal), REV (reverse)
• Select NEM if you do not want to reverse the phase of
our subwoofer.
• Select REV to i -es case the phase of your subwoofer.
46