Yamaha HTR-5750 Owner's Manual page 58

Clearing setup manufacturer codes
• Clearing a setup manufacturer code for
component control
Press an input selector button or R, to
select the component control for which you
want to clear the manufacturer code.
0
mOR
in
:"C, ' " 0"`
u 0 0
11
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
3
If you do not press any button within 30
seconds after step 2, the clearing process is
canceled. If this happens, start over from
step 1.
4
Enter the code number "0000".
The TRANSMIT indicator on the remote control
flashes twice, and the manufacturer code for the
selected component is cleared.
You can clear all setup manufacturer codes at once b) entering the
code number "99901
54