Yamaha HTR-5750 Owner's Manual page 54

• Parameter initialization
0 PAEAN. INT
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound
field
program group. all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound field
program that you want to initialize.
An asterisk I') next to a program number means that the
parameter values have been changed from their initial
settings.
Notes
• You cannot automaticalB
revert to the previous parameter
settings once you initialize a
sound field
pffigialll
group.
• You cannot separately initialize individual
sound
field
progranw.
• You cannot initialize any program groups when ''MEMORY
GUARD - is .et to ON.
• Zone set [OZONE:
SET
Use
to specify the location of speakers connected to the
SPEAKERS B terminals.
Speaker B set
SR B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT.
ZONE B
• Select FRONT to turn on/ott SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals
are set in
another room.
If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON. all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If
you connect
headphones
to
the PHONES lack on the unit
when -- SP B" is et to ZONE B. the sound is output from both
headphones and SPEAKERS B.
• It a DSP program is selected when "SP IF is set to ZONE B.
the unit automatically enter. the Virtual CINEMA DSP mode.
50