Yamaha HTR-5750 Owner's Manual page 10

Remote control
This section describes the function of each control on the
remote control used to control this unit. To operate other
components. sec "REMOTE CONTROL FEATURES- on
page 51.
O
Input selector buttons
Select the input source and change the control area.
O Sound field program / numeric buttons (1 - B)
Use to select sound field programs.
Use numbers I through 8 to select preset stations when the
unit is in tune' mode.
O NIGHT
RIMS on or off the night listening modes (see page 30).
O LEVEL
Selects the speaker channel to be adjusted and sets the
level.
O
Cursor buttons ^ / / < / > / SELECT
iJse to select and adjust sound field program parameters or
SET MENU items.
Press /
to select preset station numbers when the unit
is in tuner mode_
O TEST (RETURN)
Outputs the test tone to adjust the speaker levels.
Returns to the pro ious menu level when adjusting the
SET MENU parameters.
O TRANSMIT indicator
Flashes while the remote control is sending signals.
GI
STANDBY
Sets this unit in the standby mode.
•
SYSTEM POWER
.
111111ti on the power of this unit.
•
SLEEP
Sets the sleep timer.
•
MULTI CH IN
Selects MUI TI CH INPUT when using an external
decoder (etc.).
•
AMP
Selects the AMP mode. You must select the AMP mode to
control the mam unit.
•
VOLUME —/+
Increases or decreases the volume level.
O
MUTE
0
Infrared window
Mutes the sound. Press again to restore the audio output to
Outputs infrared control signals. Aim this window at the
the previouss ol
Wile
level.
component you want to operate.
•
EX/ES
•
CODE SET
Switches between 5.1 or 6.1-channel playback of multi-
Use to set up manufacturer codes (see page 52).
channel software.
6