Yamaha HTR-5750 Owner's Manual page 34

• Listening to high fidelity stereo sound
(Direct Stereo)
Direct Stereo allows you to bypass this units decoders and
DSP processors to enjoy pure high fidelity sound from 2-
channel PCM and analog sources.
Press PROGRAM < / C- repeatedly (or press
AMP to select the AMP mode, then press
STEREO repeatedly) to select "Direct Stereo".
1 PHOSSISAM L
_AMP_
or
Front panel
STEREO
HALL
JAZZ ROCK
Q)
MUSIC
TE RTA IN TV TH TR
MOVIE
Cf.) 0 0 1
0
LIVIDTS NIGHT
STRAIGHT
0 0
CiP
EFFECT
Remote control
Direct. 'Stereo
Notes
• 'lb avoid unexpected noise, do not play
DTS
-
encoded CDs in
this mode.
• When multi-channel signals (Dolby Digital and DTS) are input,
this unit automatically switches to the corresponding analog
input. When DTS is selected as an input mode, no sound will
be heard.)
• No sound will be output In
It it the subwooten
• CONTROL (page 26) and SET MENU
(page 44) settings are
not effective.
• The front panel display automatically dims.
• Night listening modes
The night listening modes are designed to improve
listenability at lower volumes or at night. Choose either
NiGHT:CINEMA or NIGHT:MUSIC depending on the
type of material you are playing.
Press NIGHT on the remote control repeatedly to
select cinema or music.
When night listening is selected, the NIGHT indicator in
the front panel display lights up.
NIGHT
IQ)
Remote control
• Select NIGHT:CTNEMA when watching films to
reduce the dynamic range of film soundtracks and
make dialog easier to hear at lower volumes.
• Select NIGHT:MUSIC when listening to music sources
to presene ease-of-listening for all sounds.
• Select OFF if you do not want to use this function.
Press > to adjust the effect level while
NIGHT:CINEMA or NIGHT:MUSIC is displayed.
This atitu.ts the level of compression
PREM.C11
AMMO
< 1 SE"I Er
Remote control
Effect. Lt..11:4 NIL:
• Select MIN or minimum compression.
• Select MID
for standard compression,
•
Select MAX for maximum compression.
?ofc
NIGHT:CINEMA and NIGHT:MUSIC adjustments are stored
independeinly.
Notes
You cannot use the night listening modes with the Direct Stereo
program or MI: LTI CH INPUT (even though the NIGHT
indicator lights up when Direct Stereo is selected),
The night listeinng
II lodes may vary in effectiveness depending
on the input source and surround sound settings you use.
30