Yamaha HTR-5750 Owner's Manual page 30

7
Select
a sound field grogram if desired.
Press PROGRAM <I> repeatedly (or press AMP
on the remote control to select the AMP mode, then
press one of the sound field program buttons
repeatedly) to
select a sound held program. (See
page
39 for details about sound field programs./
To adjust the tone
You can adjust the tonal quality
of your front left and right
speakers or headphones (when
connected).
Press
CONTROL on the front
panel repeatedly to select
'Wi1l31,E or BASS. then press
BASSTIREBIE —/+ repeatedly to
increase or decrease.
• Select TREBLE to adjust the
high frequency response.
• Select BASS to adjust the low
c P k
4
- I PROGRAM >
[ AMP I
Or
Front panel
STEM() HAL L
JAZZ ROCK
1
0 C
MUSIC
EN] tRiAls IV IITR MOVIE
miuTs NIGHT
EXItS STRAIGHT
(9) c0) Q-J I 0 (Z191
Remote control
To listen
with headphones (SILENT CINEMA)
"SILENT CINEMA' . allows you to enjoy multi-channel
music or movie sound. including Dolby Digital and DTS
surround, through ordinary headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HUH DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the front panel display.
Notes
this unit will not be set to 'SILENT CINEMA"
when MULTI
CH INPUT is selected as the input source.
"SILENT CINEMA - is not effective when the Direct Stereo or
2ch Stereo program is selected,
or in STRAIGHT
mode.
Frequency response_
To cancel the tone control, press CONTROL repeatedly to
select BYPASS.
24,A
Speaker and headphone adjustments are stored independently.
Notes
• It sou increase
on (lee
re e the high-frequency or low-frequency
sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.
CONTROL is not effective with the Direct Stereo
program
fpage
301 or MIT TI CH INPUT.
To mute the sound
Press MUTE on the remote control.
The MUTE
indicator blinks in the
front panel display.
To
resume the audio output. press
MUTE again (or press VOLUME —kb
The MUTE indicator disappears from
the display.
You can adjust
the
muting
level (see paSe 4 8).
26