Yamaha HTR-5750 Owner's Manual page 49

Using SET MENU
Use the remote control to access and adjust each
parameter_
6
Press SELECT to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the items
you want to adjust.
To return to the precious menu level, press RETURN.
0 0 0
1
ic
'EH Ed
0 77 0 0
0
a = 2,8
agr.
rzri — mr-Th
3-7
1)):
You can change SET MENU parameters while the unit is
reproducing sound.
Note
You cannot change some SFr MENU parameters while the unit
Is in either cinema or music night listening mode.
1
Press AMP.
2
Press SET MENU.
"BASIC SETUP appears in the front panel display.
3
Press /s / Nt to display MANUAL SETUP.
MRINUAI 'P.:ETUP
4
Press SELECT to enter MANUAL SETUP.
I SOUND MENU appears in the front panel display.
1 P:OUND MENU
5
Press n /
'
V
to display the desired menu.
P;C:IUND MENU
2 I NPUT MENU
3 OPT I ON MENU
7
Press n / N./ to select the item you want to
adjust, then press < / > to change the setting
of the item.
Repeat this operation
to select and adjust each setting.
To return to the pre' ious menu les.el, press RETURN.
To exit, press SET MENU when finished.
Memory back-up
The memory hack-up circuit prevents the stored data
from being lost ex en if this unit is in the standby mode.
Howes er. if the power cord is disconnected from the
AC outlet. or the power supply is cut for more than (Inc
week, the stored data will be lost. If so. adjust the
items again.
45