Honda 2006 Accord Owner's Manual page 511

05/10/03 20:32:03 32SEA630_511
Changing a Flat Tyre
WHEEL WRENCH
8. Loosen the five wheel nuts 1/2
turn with the wheel wrench.
508
Taking Care of the Unexpected
JACKING POINT
9. Locate the jacking point nearest
the tyre you need to change. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
WHEEL WRENCH EXTENSION
10. Use the extension and wheel
wrench as shown to raise the car
until the flat tyre is off the ground.