Honda 2006 Accord Owner's Manual page 484

05/10/03 20:28:49 32SEA630_484
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Turn on the lights to make sure
the new bulb is working.
7. Install the light assembly cover.
Make sure it snaps into place.
Replacing Rear Bulbs (in Boot
Lid)
FASTENERS
1. Open the boot.
2. To replace a bulb on the left side,
remove the screws in the centre of
each of the two fasteners. On the
right side, remove the screw of the
fastener.
3. Pull the lining back carefully.
BULBS
4. Determine which bulb is burned
out: tail-light, rear fog light (on
some types), or back-up light.
CONTINUED
Maintenance
Lights
481