Honda 2006 Accord Owner's Manual page 437

05/10/03 20:22:19 32SEA630_437
Cooling System (Diesel models)
EXPANSION TANK CAP
1. Make sure the engine and radiator
are cool.
2. Loosen the expansion tank cap by
turning it 1/8 turn anticlockwise.
This will relieve any remaining
pressure in the cooling system.
3. Remove the expansion tank cap by
pushing down and turning
anticlockwise.
434
Maintenance
EXPANSION TANK
MAX LINE
4. The coolant level should be up to
the MAX line. Add coolant if it is
low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spills immediately.
Spilled coolant could damage
components in the engine
compartment.
5. Put the expansion tank cap back
on. Tighten it fully.
Do not add any rust inhibitors or
other additives to your car's cooling
system. They may not be compatible
with the coolant or engine compo-
nents.