Honda 2006 Accord Owner's Manual page 431

05/10/03 20:21:33 32SEA630_431
Cooling System (Petrol models)
1. Make sure the engine and radiator
are cool.
2. Turn the radiator cap anticlock-
wise, without pressing down on it,
until it stops. This relieves any
pressure remaining in the cooling
system.
3. Remove the radiator cap by
pushing down and turning
anticlockwise.
428
Maintenance
RADIATOR CAP
RESERVE TANK
4. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spills immediately.
Spilled coolant could damage
components in the engine
compartment.
5. Put the radiator cap back on.
Tighten it fully.
6. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your car's cooling
system. They may not be compatible
with the coolant or engine compo-
nents.