Honda 2006 Accord Owner's Manual page 489

05/10/03 20:29:25 32SEA630_489
Lights
Replacing a Rear Licence Plate
Bulb
1. Open the boot. Put a cloth on the
edge of the licence plate garnish.
Use a flat-tipped screwdriver to
pry carefully on the edge of the
licence plate garnish until it pops
out.
486
Maintenance
LICENCE PLATE GARNISH
2. Remove the licence plate garnish
while pulling out the four snap
fasteners.
3. Remove the licence light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.