Honda 2006 Accord Owner's Manual page 488

05/10/03 20:29:18 32SEA630_488
Remove the electrical connector
3.
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
4. Remove the bulb by turning it
approximately one-quarter turn
anticlockwise.
5. Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
BULB
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the front fog lights to test
the new bulb.
8. Reinstall the side under cover.
Make sure it is installed under the
edge of the bumper.
9. Reinstall the two mounting bolts
on the side under cover and
tighten them securely. Put the
holding clip back on the side
under cover and push on the
centre until it locks (the centre is
flush with the head).
Lights
485
Maintenance