Digicom 2000 User Manual page 5

CHAPTER_.2A_ 4/8/00 11:19 PM Page 5
Using a Microphone:
Internal or External
You can use one of two microphones to record
messages. Your DigiCom has an internal micro-
phone. It is located under a small hole on the
upper right of the front panel and is labeled `Mic'.
If you have purchased an external microphone,
you may find it easier to use since you can hold it
closer to your mouth. To use the external
microphone, be certain it has batteries.
Plug it into the port labeled `EXT Mic' on the
right side panel. Contact your DigiCom
representative for information on compatible
external microphones.
Inserting an Overlay
If you are not already familiar with DigiCom
overlays or the touch panel, read those sections
of Chapter One before moving on. To use the
DigiCom you need to have an overlay on the
touch panel.
PROGRAM/ LOCK AREA/ KEYBOARD
PLAY LEVELS SEQUENCE LAYOUT
SPEAK LEVEL DEFINE RECORD
SPEECH ERASE EDIT TRANSFER
CONTROLS LEVEL SEQUENCES AREA MSG
A1 B1 C1
1
A2 B2 C2
2
A3 B3 C3
3
A4 B4 C4
4
A B C
IMMEDIATE/ SCAN KEY LOCK
LINK CONTROLS CONTROLS GROUPS
VOLUME
BACKSPACE/
LINK STOP GROUP DOWN
DELETE SEQ
<
ERASE
DISK RS-232
KEY
D1 E1 F1
D2 E2 F2
D3 E3 F3
D4 E4 F4
D E F
4X8
SET UP COMMAND
VOLUME
UP
> OK CANCEL
G1 H1
1
G2 H2
2
G3 H3
3
G4 H4
4
G H
2–4