Digicom 2000 User Manual page 11

CHAPTER_.2A_ 4/8/00 11:19 PM Page 11
Using LCD Messages to
Scroll Through Options
After you turn the DigiCom on and begin
programming, many of the SET UP and
COMMAND functions will require you to choose
from a list of options. Some of the white function
keys will provide options when you are in Program
mode also. You will make selections using the [<],
[>], [OK], and [Cancel] keys. Look at an overlay
now to locate these keys.
The [<] and [>] arrow keys allow you to scroll
through options so you can step forward and
backward through the options. You will be able
to change the display and when the display
shows the desired option, select that choice by
pressing the [OK] key. If you decide to leave
things as they were, press the [Cancel] key.
As you follow the steps in upcoming sections
you will be scrolling through options and
using all you've learned to select options. By
understanding these basics, you will be able to go
on to program and customize quickly!
2–10